Industrial Rubber Spares

Enriched with vast industrial experience, we are involved in offering a wide range of SOG X Ring. These are basically an all-rubber seal, which mounts directly on the shaft and seals axially against the counter-face, housing, bearing race, and similar surfaces. Our devices are designed with a long flexible lip, which make these highly efficient. Our SOG X Ring are widely recommended by clients owing to its purpose specific construction and durability.

Features:

• Optimum quality
• Reliability
• Application specific

• Dual-Sealing Action: The four-lobed design creates two sealing surfaces on each side (four total contact points), providing more effective leak prevention with less compressive force compared to an O-ring's single contact point.
• Reduced Friction and Wear: Because the X-ring requires less radial squeeze to form a seal, it generates less friction, which in turn reduces wear and leads to a longer service life.
• Resistance to Twisting: The X-shape offers higher stability in the groove, which helps to prevent the seal from rolling or twisting (spiral failure) during reciprocating or rotating movements, a common issue with O-rings in dynamic applications.
• Improved Lubrication: The groove between the sealing lips acts as a lubricant reservoir, which further reduces friction and improves startup performance.
• Parting Line Placement: The manufacturing parting lines (flash) are located between the lobes, away from the critical sealing surface, eliminating leakage paths often found on O-rings at the parting line. 

SOG V-ring seals are known for their reliable performance in a variety of industrial applications, particularly in hydraulic and pneumatic systems. 

• Function: They are primarily used for dirt exclusion, preventing dirt, moisture, and other foreign matter from entering a housing or bearing assembly, while simultaneously keeping lubricants in. The flexible lip seals lightly against the counterface, at a right angle to the shaft.
• Material Options: SOG offers V-seals in several materials to suit different environmental and performance requirements. Common options include:
  • Nitrile Rubber (NBR or Buna N): A common choice, effective in a temperature range of -20°F to +230°F.
  • Viton® (FPM/FKM): Used for applications requiring higher chemical and temperature resistance.
  • PTFE (Polytetrafluoroethylene): Known for its chemical resistance and high-pressure capabilities (up to 300 bar).
  • Polyurethane (PU): Often used in industrial applications.
• Design Types: The seals come in various styles, including VA, VS, and VL types, which differ in their dimensions and specific application suitability.
• Ease of Installation: V-ring seals are stretch-fit and designed for easy installation, as they can be stretched over the shaft. 

Product SpecificationsSpecifications vary widely based on the specific SOG V-ring model (e.g., VA, VS, VL types). Below are example specifications for a typical SOG V-ring: 

Enriched with vast industrial experience, we are involved in offering a wide range of SOG NBR Oil Seal. These are basically an all-rubber seal, which mounts directly on the shaft and seals axially against the counter-face, housing, bearing race, and similar surfaces. Our devices are designed with a long flexible lip, which make these highly efficient. Our SOG NBR Oil Seal are widely recommended by clients owing to its purpose specific construction and durability.

 

Features:

 

• Optimum quality
• Reliability
• Application specific

The SOG Metal Wiper is a type of sealing component typically used in hydraulic and pneumatic systems. It combines a metal core with a wiper lip to effectively protect the system from contaminants while ensuring smooth operation. This type of wiper is designed for more demanding applications, where the combination of metal and flexible sealing materials is needed for durability and high-performance sealing.

Enriched with vast industrial experience, we are involved in offering a wide range of Metal Oil Seal. These are basically an all-rubber seal, which mounts directly on the shaft and seals axially against the counter-face, housing, bearing race, and similar surfaces. Our devices are designed with a long flexible lip, which make these highly efficient. Our Metal Oil Seal are widely recommended by clients owing to its purpose specific construction and durability.

 

Features:

 

• Optimum quality
• Reliability
• Application specific